Download our leaflets and get inspired.
Our products require professional installation and if in doubt we always advice you to contact your local installer.
Download the software to a USB by clicking the link.
Then go to your central controller and do the following:
1. Insert USB stick2. Press the screen saver to show the Start-menu3. Select ”House Control”4. Select ”Settings”5. Select ”Wi-Fi and Apps”6. Select ”App Options”7. Select "Software Upgrade"8. Select "Upgrade via USB"9. Select "Upgrade Software Now!"
1. Insert the USB 2. Remove the front cover and press the SETUP pin for 3 seconds to enter the service area 3. Select “Software”4. Select “Software Upgrade”5. Select “Start Upgrade” 6. Select "Upgrade Software Now"
First download the latest software to a MiniSD Card by clicking the link.
1. Insert the MiniSD Card2. Remove the front cover and press the SETUP pin for 3 seconds to enter the service area 3. Select “Software”4. Select “Software Upgrade”5. Select “Start Upgrade” 6. Select “Upgrade Software Now” Note: Central controllers from before 2010 are sometimes using software version 1.x.x. In that case you need to update your central controller to version 2.1.35 before updating to the latest software.
We market our heating solution products across the world. For specific information on prices and installation costs, please contact your local installer.
If you wish to contact Danfoss, please go to your local Danfoss site. You find it by clicking on 'Danfoss Group Global' at the very top of this page.
You can contact our expert team directly and get help with answers about Danfoss Heating Solutions.
In this section you can also see our FAQ - Heating Solutions.